Semtech GS12281 Ultra High Definition (UHD)-Serial Digital Interface (SDI) Cable Driver is a low power, multi-rate, and a retiming device which supports data rates up to 12Gbps. This cable driver is designed to receive 100Ω trace input signals and transmit the re-timed signal over 75Ω coaxial cables. The 100Ω trace input supports up to 17dB of insertion loss. The GS12281 cable driver features dual non-inverted 75Ω cable interface with on-chip termination. This cable driver offers an integrated eye monitor which provides non-disruptive mission mode analysis of the post-equalized input signal. The 256 x 128 resolution scan matrix allows accurate signal analysis and enables field analysis.
Features
Dual non-inverted 75Ω cable interface with on-chip terminationSMPTE ST 2082-1, ST 2081-1, ST 424, ST 292-1, and ST 259 compliant input/outputMulti-standard operation from 1Mbps to 11.88Gbps3D input signal eye monitorCable driver modes:Wide swing controlPre-emphasis to compensate for significant insertion loss between device output and Bayonet Neill–Concelman (BNC)Automatic/manual output slew rate controlManual or automatic re-timer bypassManual or automatic mute or disable on Loss Of Signal (LOS)Clock Data Recovery (CDR)
Applications
UHDTV1 and UHDTV24K D-Cinema and 3D High Frame Rate (HFR)High Dynamic Range (HDR) production image formatsCameras and switchersDistribution amplifiers and routers
Specifications
Single 1.8V power supply for analog and digital core2.5V or 3.3V for cable driver output supplyGennum Serial Peripheral Interface (GSPI) serial control and monitoring interface-40°C to 85°C operating temperature range6mm x 4mm 40-pin Quad-Flat No-Leads (QFN) package
